A Guide To Hiring Professionals For Your Roof Leak Repairs

This article will provide advice about how to temporarily repair a roof leak. This is about when you can’t get a specialist there right away and you need to get things done right away. However, these are just temporary solutions and should be treated similarly to placing a spare tyre on your vehicle. It’s not for long car trips; it’s enough to get you to a mechanic! If you are looking for more tips, check out 7 Benefits Of Hiring Professionals For Your Roof Leak Repairs.


The first step in repairing a leaking roof is to ensure your safety. When the bad weather that caused the leak is still raging, do not try to repair the roof. Wait until the rain has stopped and the winds have died down. This should, ideally, come across as common sense. Instead, concentrate on what you can do to safeguard the structure’s interior. Grab some buckets and plastic wastepaper baskets and collect the water that is leaking under the surface. If you have access to a thick plastic sheet or tarp, string it up so the water pools first on the sheet and then empties into a bucket for larger leaks.

Outside the building

If your building has a flat roof and the weather permits, climb up to see if there is any water ponding, then try to clear it with a push broom. Regardless of the type of roof you have, make sure the gutters and drains are clear of debris so that water draining properly is not obstructed.

Find the Source of the Leak

You’ll have a better chance of finding a way to avoid the leak if you can trace its source. If the leak is found inside, check the outside of the roof at that location to see if the water is getting in. Leaks are popular in places where mechanical equipment is installed on the roof. Similarly, flashing used to deflect water away from chimneys or other protruding structures from the roof may have leaks. At the points where the material was chemically bound together, single-ply membrane roofs can have wounds, punctures, or breaks (seams).

Patches that are only there for a short time


Patches may be used to temporarily secure BURs (built-up roofs). This is something that should be done after the storm has passed, rather than as a fast fix when the rain is falling. Use roof cement made of plastic. This is a trowel-type material that comes in rain or wet patch grades. Remove any loose gravel from the BUR materials before applying the cement, which should be six inches wider than the leak spot. Apply pressure and fully fill the room.