A very valuable addition to every home is a new paver patio built in your back yard. Many individuals would love to have a beautifully landscaped and challenging area where they can spend enjoyable evenings and have a barbecue. Sadly, it’s impossible to do without a patio. There is only one choice that is cost efficient, aesthetic, and durable when deciding what form of material to use for your new patio. Feel free to find more information at Etowah Patio Pavers Association
Pavers have a wide variety of textures and colours for homeowners. In addition, they are much more resilient than poured concrete slabs for cracking due to settling and freezing thaw. Like their concrete slab equivalent, the reason they don’t crack is because each paver is its own miniature slab. The bigger a slab of concrete, the more fragile it is because it is longer and wider than it is thick. Pavers are small, individual bricks that are about as dense as they are large or long. Therefore, pavers are much stronger and denser than concrete slabs, and can withstand heavier loads. Since they interlock, in freeze thaw cycles, pavers may also flex. Concrete slabs do not, on the other hand, flex, but crack instead.
You must consider the scale, shape, location, and elevation when considering a new paver patio. Ideally, to fit a patio, your backyard is relatively level, partly shaded, and wide enough. In order to excavate the area to be paved and to carry in base material and pavers, your paving contractor may need access. With four inches of base material underneath, some sand, and then the pavers, most patios are constructed. Determine where you want the height of the patio surface to be, then estimate an extra six to seven inches below that, to get an idea of how deep the excavation would need to go. In order to properly instal a solid base for the pavers to be placed on, a small, two hundred square foot patio will require seven thousand pounds of base material and a thousand pounds of sand. Base materials vary by area, but the best tend to be recycled concrete.
If you have an existing concrete patio already, you can easily add thin one-inch pavers over the surface. If you intend to use pavers on top of and outside where the concrete already sits to extend the existing patio, then thick pavers of two to three eighths of an inch can be used throughout. This way, you would not have any difference in colour or shade between thick and thin pavers that were manufactured at different times, but rather a clear field with the same content.